Suwanee Garage Door Solutions, LLC
Your garage door will be working at its absolute best!
Call Today: (678) 901-4233
Now that you have your new garage door installed, you're starting to notice that the door isn't coming down as quickly as it should. This may not be alarming to some people since the door eventually does what it is supposed to do but to others, it is clear that there is a problem with their garage door. The one thing you don't want to occur is to need access to your garage and are unable to get it due to a problem with the door.
Whenever your garage door is stuck in the open or closed position, you can operate it manually. Your garage door opener is equipped with an emergency release cord, which is often red, hanging from the back of the opener. Once you pull the cord, it will disconnect the opener and enable you to manually open the door. We would have to say that this is a welcomed feature of the garage door opener since being stuck is certainly an emergency situation.
If the problem that you're experiencing is in opening the door, you may have a problem with your springs. If they are weak, they will not be able to hold the door up; therefore, they will need to be repaired or replaced. A professional service technician should handle this job for you since they have the experience and qualifications.
Also, if your door is stuck and will not open, it might be necessary to completely unplug the garage door opener in order to reboot it. Your opener should also have indicator lights, which will let you know exactly where the problem is located. It could be something rather simple like changing the batteries to the remote or reprogramming the remote. If you're having a problem with the wall-mounted opener, you may have electrical problems. Check the breakers to see if the panel was tripped. You should also look to see if there are any loose or disconnected wires, especially wires to the door sensors.
Most often, when you notice sounds from your door, it is likely to loose parts that need to be lubricated or loose connections. Your door should be properly examined and where there are loose screws or bolts, they need to be tightened up. Make sure there is nothing obstructing the track. You can remedy most noise issues by spraying your springs with WD-40, hinges, rollers and your track system.
When you're having trouble with your door closing all the way, this is often because of something blocking the doors safety sensors. In some cases, your door will not close because the sensor's lens may be dirty or out of alignment. Any of these things will prevent your garage door from closing all the way. Your safety sensors are situated toward the bottom of your door. You can clean them yourself with a non-abrasive cleaner and by gently cleaning rubbing. Don't rub too hard, or you'll scratch the sensors. The sensors can also be adjusted. Just make sure the light is lit on both of them.
If you have a close limit switch on your remote, this may be the first thing to adjust. This feature is located on the back of your garage door opener and reads either up or down. Turn this indicator until the door is functioning properly again. If it still occurs, you can also use close force feature; also located in the rear of the opener. The knob should be turned clockwise in order to make the necessary adjustment.
If you're not experiencing any type of problems with the way the door is opening or closing, yet the motor is still running; this sounds like a problem related to your close limit switch. It probably needs to be adjusted. You'll want to do this in increments and continue to check by trying to use the opener.
While we are happy to discuss some of the most common problems that you might experience with your garage door, we caution anyone who attempts to troubleshoot the problem. If you have experience in this area and feel confident in your ability to troubleshoot the problem, we feel fairly confident in telling you to go ahead and troubleshoot before contacting us. However, if you have never experienced any type of problems with your garage door opener, we would encourage you to allow one of our highly skilled and reliable service technicians to find and resolve the problem for you. This simply serves as a precaution to make sure that you and everyone around you, remains safe.
You should make sure that if you are determined to find the problem yourself by troubleshooting, that you are fully aware of the danger that exists when you do this on your own. We understand that there are many videos online that will show you how to make necessary repairs and adjustments to your garage door. The problem with this is that they don't include safety precautions that you should take. However, you can consult the owner's manual for your garage door opener, to make sure you're safe when you're making necessary repairs to your garage door.
We suggest using the garage door opener's manual because it is hardly ever a problem with the actual door. We almost always find the problem involves the garage door opener. Some openers are prone to giving you problems while others are less problematic. This is why we advise you to choose wisely when investing in a new opener.
Our Suwanee Garage Door Solutions, LLC can help with your Repair and Install New Garage Door as well as for your Opener Installation, Opener Repair and Spring Repair Garage Door. Just give us a call and see for yourself.